1000 CRM Jacketed 1000L Cooker Kettle (Contra Rotating) 316

The IOPAK Cooker/Kettle is used by many food manufacturers - many of whom have purchased multiples. It is used for jams, sauces, stews, stocks, confectionery pastes, etc.

The IOPAK Kettle has many FEATURES:
- High standard of fabrication
- Excellent value for money
- Design input from our customers used by our engineers to constantly improve design
- Kettle fabricated in AISI 316
- Contra- Rotating mixer arm is bearing supported both top and bottom ensuring a smooth, quiet mixing process
- Contra- Rotating mixer arm is designed to prevent burn on as well as treating products gently
- Teflon tipped hinged scraper arms ensure smooth clean scraping action against the sides and bottom of the hemispherical dome shape of the process vessel
- Simple to clean
- Jacket can be used for cooking or cooling
- Digital Temperature Indicator for temperature control
- 2 x half moon lids for hygiene

TECHNICAL DETAILS:
The interior of the tank has a dome base and is fitted with a 4" sanitary product outlet including an air actuated discharge ball valve.

A swept surface (Teflon tipped) stirrer is top and bottom bearing supported and direct driven by a 3kW, 29rpm, 415V AC, 3 Phase gear motor.

Teflon scrapers can be easily changed by removing a simple hook arrangement.
An additional contra - rotating centrally mounted agitator is fitted with a 1.1kW, 49 rpm motor.
A digital (- 20 to 150 deg C ) temperature indicator indicates the temperature of the tank contents.
Design Pressure (WP) : 300 KPa
Test Pressure (HTP) : 450 KPa
Design Temperature (DT) :135 deg C (max 150 deg C)
Code: AS1210 Class 3
VWA: V0420425

Steam consumption approx. 900kgs per hour.

Internal Diameter - 1300 mm
Internal Depth - 1000mm
Outer Diameter - 1450mm
Lid height above floor - 1650mm
Outlet Height above floor - 560mm
Overall Height - 2420mm
Jacket inlet & outlet ports 25mm diameter
Material of Construction - 316 s/s (inner) 304 s/s (outer).
Wall Thickness: 4mm inside wall, 2.0mm jacketed wall

The cooker has two individual jackets, upper and lower jackets. There are four ports on the same side of the cooker. From top to bottom, the upper most port is known as No.1 port and the bottom most port is known as No. 4 port which is located at the base of the cooker.

Jacket inlet & outlet ports 25mm diameter
Material of Construction - 316 s/s (inner) 304 s/s (outer).
Wall Thickness: 4mm inside wall, 2.0mm jacketed wall
Temperature Probe: PT100
No.1 port is the steam inlet of the upper jacket.
No. 2 port is the condensate outlet of the upper jacket.
No.3 port is the steam inlet of the lower jacket.
No. 4 port is the condensate outlet of the lower jacket.
Two safety pressure relief valves must be mounted close to the inlet ports of the two jackets.

The scraper must be running as soon as one of the steam valves is open.

Optional Price for 500KPa: $5,600 + GST
Design Pressure (WP) : 500 KPa
Test Pressure (HTP) : 750 KPa

* Recommended Oil: TORA 220 or equivalent (if the gearbox is 7 years old or more, TORA 320 or equivalent)
Pdf attached