SP-M-C Sachet Packer with Volumetric Cup Filler and Piston Pump

This automatic IOPAK Sachet Packer comes COMPLETE with its own VOLUMERIC CUP FILLER AND PISTON PUMP.

It has a host of new features which make it a winner with contract packers who run their machines at maximum capacity!

Product Application
Granules & Powders (Mostly Free Flowing)
Liquids, Sauces, Shampoo etc

Technical Specifications
Speed: 25 - 90 packs/min (Please See 'Note')
Max Weight/Bag: 150 cc
Film Width: 50 - 240 mm (3 or 4 Sided)
Film Width: 45 - 120 mm or 120 - 300 mm (Stick Pack)
Bag Length: 50 - 200 mm
Bag Type: 3-Sided Seal or Stick Pack (NOT BOTH).
* 4-sided available upon special request at additional cost
Film Thickness: 35 - 80 micron
Bag Length: 50-200mm
Bag Type: Pillow Pack / Stick Pack
Voltage: 1 Phase, 240V, 50Hz
Power: 0.5 Hp

Features - WHICH DIFFER FROM OUR OLDER MACHINES
- Stepper motor used for print registration ensures that there is little packaging wastage in stop/start situations. The jaws move in and out horizontally, thus eliminating wear and tear which occurs with rotary jaws
- The knife uses a guillotine action, which functions independently of the jaws, ensuring a clean cut. The blades remain sharp for much longer
- There is also a dancing arm for film tensioning
- Cold pull down/positioning rollers ensure that there is no burn-on from the film to the rollers (the machine uses a fin seal mechanism for vertical sealing)
- Temperature control is more accurate since there is no rotary union. Instead the thermocouple is stationery
- As quiet as a mouse. Noise level is virtually nil
- It works as steadily and efficiently as a mini VFFS or bagmaker
- Simply change bag size on touchscreen. The machine is VERY SIMPLE TO OPERATE AND CLEAN! There is a self-diagnostic system, bag length indicator, counter etc.

Included
- User-friendly Touch screen control
- Panasonic PLC
- Easy length adjustment from screen
- Bag length indicator
- Speed indicator
- Bag counter
- Heavy-duty waterproof heater
- Self-diagnostic system.
- Automatic jaw release when product traps in seal bar
- Japanese made photocell for bag registration
- Japanese made digital temperature controller for back seal and jaw seal
- German made SIEMENS for main drive motor
- All read switches are non-contact switches
- Bi-active horizontal seal bar.
- All product-contacts are in SUS304 construction
- 1 set of holding funnel
- 1 set of bag former

Options
- Hot Foil Coder Printer
- Hole Punch Device (Euroslot also Available)
- Stainless Steel Frame
- Tear Notch Device
- Extra Set of Forming Shoulder
- Extra Set of Jaws

Note
Actual speed is subject to the following factors:
- Product Weight
- Property of Product and Behaviour
- Constant Feed of Product
- Type of Packaging Material
- Physical Influence of Surrounding
- Operation and Maintenance of Machine

* Machine Dimensions & Weight - Nominal Only
* Photos & specifications of the actual machine may change without prior notice.